1. Forum
  2. FidoNet
  3. FIDOSOFT.HUSKY

  • RNtrack 2.1.9/Lnx

    From Dan Richter@1:317/3 to Michael Dukelsky on Thu Oct 22 21:21:10 2020
    Hi Michael,

    I know this is the Husky echo, but I'm hoping you might be able to help me out with an issue with RNtrack.

    I think I have everything set up in the config file correctly. I have been trying to run some tests through it on my test system, and I'm getting the following error:

    Internal Error!!! Please, read report.err in documentation. ---------------------------------------
    2020-10-22 21:06:10 RNTrack 2.1.9/Lnx
    Check point: 309
    Signal: 11
    ---------------------------------------
    --- RNtrack 2.1.9/Lnx stopped.

    I was trying to route a netmail message to a node that connects directly to this system.

    It seems to be this section where it's crashing.

    ScanDir: "/home/dan/mystic/netmail/out"
    Mask: * * * 1:305/3.* * * *
    Action: RouteFilebox Direct 1:305/3

    I also put the logging on 5, and this is the last few lines:

    2020-10-22 21:06:10 Message is equal to mask.
    2020-10-22 21:06:10 Route message from 1:317/3.1 to 1:305/3 via 1:305/3 2020-10-22 21:06:10 Split kludge. p == 'Via', p2 == '1:317/3 RNtrack
    2.1.9/Lnx 22 Oct 2020 21:06:10 UTC-0600'
    2020-10-22 21:06:10 --- RNtrack 2.1.9/Lnx stopped.

    I'm pretty sure it's something in my config file, but I haven't been able to track it down. Everything up until that point seems to be working fine. I've tried changing the Action: to 'Route Normal 1:305/3', Route Normal %', and nothing seems to make any difference.

    Any help you could provide would be greatly appreciated. Thanks.


    ---

    Black Panther(RCS)
    aka Dan
  • From Michael Dukelsky@2:5020/1042 to Dan Richter on Fri Oct 23 11:11:52 2020
    Hello Dan,

    Thursday October 22 2020, Dan Richter wrote to Michael Dukelsky:

    I think I have everything set up in the config file correctly. I have
    been trying to run some tests through it on my test system, and I'm getting the following error:

    Internal Error!!! Please, read report.err in documentation. --------------------------------------- 2020-10-22 21:06:10 RNTrack 2.1.9/Lnx Check point: 309
    Signal: 11
    ---------------------------------------
    --- RNtrack 2.1.9/Lnx stopped.

    Sorry, but I stopped supporting RNtrack. Its last version was 2.1.10. Try it, maybe it will help.

    Michael

    ... node (at) f1042 (dot) ru
    --- GoldED+/LNX 1.1.5-b20170303
    * Origin: Moscow, Russia (2:5020/1042)
  • From Dan Richter@1:317/3 to Michael Dukelsky on Fri Oct 23 02:29:36 2020
    On 23 Oct 2020, 11:11a, Michael Dukelsky said the following...

    Sorry, but I stopped supporting RNtrack. Its last version was 2.1.10.
    Try it,maybe it will help.

    I'll take a look at the newest version.

    I figured it didn't hurt to ask. :)

    Thanks,


    ---

    Black Panther(RCS)
    aka Dan Richter
    Castle Rock BBS
    telnet://bbs.castlerockbbs.com
    http://www.castlerockbbs.com
    http://github.com/DRPanther
    The sparrows are flying again...

    --- Mystic BBS v1.12 A47 2020/10/20 (Linux/64)
    * Origin: Castle Rock BBS - bbs.castlerockbbs.com (1:317/3)
  • From Dan Richter@1:317/3 to Michael Dukelsky on Fri Oct 23 02:59:50 2020
    On 23 Oct 2020, 11:11a, Michael Dukelsky said the following...

    Sorry, but I stopped supporting RNtrack. Its last version was 2.1.10.
    Try it,maybe it will help.

    I just tried to unarchive it, and I'm getting:

    tar -xvzf rntrack-1_1_10-src.tar.bz2

    gzip: stdin: not in gzip format
    tar: Child returned status 1
    tar: Error is not recoverable: exiting now


    ---

    Black Panther(RCS)
    aka Dan Richter
    Castle Rock BBS
    telnet://bbs.castlerockbbs.com
    http://www.castlerockbbs.com
    http://github.com/DRPanther
    The sparrows are flying again...

    --- Mystic BBS v1.12 A47 2020/10/20 (Linux/64)
    * Origin: Castle Rock BBS - bbs.castlerockbbs.com (1:317/3)
  • From Michael Dukelsky@2:5020/1042 to Dan Richter on Fri Oct 23 12:07:26 2020
    Hello Dan,

    Friday October 23 2020, Dan Richter wrote to Michael Dukelsky:

    Sorry, but I stopped supporting RNtrack. Its last version was
    2.1.10. Try it,maybe it will help.

    I just tried to unarchive it, and I'm getting:

    tar -xvzf rntrack-1_1_10-src.tar.bz2

    It should be 2.1.10, not 1.1.10. Look here: https://sourceforge.net/projects/ftrack-as/files/RNtrack/2.1.10/

    BTW, there is also a Linux binary rntrack-2_1_10-lnx-x86_64.tar.bz2 there.

    Michael

    ... node (at) f1042 (dot) ru
    --- GoldED+/LNX 1.1.5-b20170303
    * Origin: Moscow, Russia (2:5020/1042)
  • From Wilfred van Velzen@2:280/464 to Dan Richter on Fri Oct 23 11:20:46 2020
    Hi Dan,

    On 2020-10-23 02:59:50, you wrote to Michael Dukelsky:

    Sorry, but I stopped supporting RNtrack. Its last version was 2.1.10.
    Try it,maybe it will help.

    I just tried to unarchive it, and I'm getting:

    tar -xvzf rntrack-1_1_10-src.tar.bz2

    gzip: stdin: not in gzip format
    tar: Child returned status 1
    tar: Error is not recoverable: exiting now

    -j, --bzip2
    filter the archive through bzip2

    So use 'y' instead of 'z'...


    Bye, Wilfred.

    --- FMail-lnx64 2.1.0.18-B20170815
    * Origin: FMail development HQ (2:280/464)
  • From Oli@2:280/464.47 to Dan Richter on Fri Oct 23 11:28:09 2020
    Dan wrote (2020-10-23):

    On 23 Oct 2020, 11:11a, Michael Dukelsky said the following...

    Sorry, but I stopped supporting RNtrack. Its last version was
    2.1.10. Try it,maybe it will help.

    I just tried to unarchive it, and I'm getting:

    tar -xvzf rntrack-1_1_10-src.tar.bz2

    gzip: stdin: not in gzip format
    tar: Child returned status 1
    tar: Error is not recoverable: exiting now

    the -z parameter is for gzip files, but this is a bzip2 file. Use the -j parameter for bzip2 files:

    tar -xvjf

    newer tar versions do recognize the compression automatically. This should als work:

    tar -xvf

    or

    tar -xvaf

    ---
    * Origin: (2:280/464.47)
  • From Dan Richter@1:317/3 to Michael Dukelsky on Fri Oct 23 12:18:38 2020
    On 23 Oct 2020, 12:07p, Michael Dukelsky said the following...

    tar -xvzf rntrack-1_1_10-src.tar.bz2

    It should be 2.1.10, not 1.1.10. Look here: https://sourceforge.net/projects/ftrack-as/files/RNtrack/2.1.10/

    That was just a typo. That's what happens when you send a message at 3am...

    BTW, there is also a Linux binary rntrack-2_1_10-lnx-x86_64.tar.bz2
    there.

    Yes, and I'm getting the same error with that binary. It also states that it's version 2.1.9.


    ---

    Black Panther(RCS)
    aka Dan Richter
    Castle Rock BBS
    telnet://bbs.castlerockbbs.com
    http://www.castlerockbbs.com
    http://github.com/DRPanther
    The sparrows are flying again...

    --- Mystic BBS v1.12 A47 2020/10/20 (Linux/64)
    * Origin: Castle Rock BBS - bbs.castlerockbbs.com (1:317/3)
  • From Dan Richter@1:317/3 to Wilfred van Velzen on Fri Oct 23 12:28:50 2020
    On 23 Oct 2020, 11:20a, Wilfred van Velzen said the following...

    -j, --bzip2
    filter the archive through bzip2

    So use 'y' instead of 'z'...

    Thanks Wilfred. I was able to get it with tar -xf.

    I've never had problems like that with a .bz2 file before...


    ---

    Black Panther(RCS)
    aka Dan Richter
    Castle Rock BBS
    telnet://bbs.castlerockbbs.com
    http://www.castlerockbbs.com
    http://github.com/DRPanther
    The sparrows are flying again...

    --- Mystic BBS v1.12 A47 2020/10/20 (Linux/64)
    * Origin: Castle Rock BBS - bbs.castlerockbbs.com (1:317/3)
  • From Dan Richter@1:317/3 to Oli on Fri Oct 23 12:30:08 2020
    On 23 Oct 2020, 11:28a, Oli said the following...

    the -z parameter is for gzip files, but this is a bzip2 file. Use the -j parameter for bzip2 files:

    tar -xvjf

    Thanks Oli. I was able to get it with the tar -xf command. This is the first time I've ever had problems with an archive like that...


    ---

    Black Panther(RCS)
    aka Dan Richter
    Castle Rock BBS
    telnet://bbs.castlerockbbs.com
    http://www.castlerockbbs.com
    http://github.com/DRPanther
    The sparrows are flying again...

    --- Mystic BBS v1.12 A47 2020/10/20 (Linux/64)
    * Origin: Castle Rock BBS - bbs.castlerockbbs.com (1:317/3)
  • From Benny Pedersen@2:230/0 to Dan Richter on Fri Oct 23 22:58:04 2020
    Hello Dan!

    23 Oct 2020 02:59, Dan Richter wrote to Michael Dukelsky:

    tar -xvzf rntrack-1_1_10-src.tar.bz2

    gzip: stdin: not in gzip format

    means your tar is missing support for bzip2


    Regards Benny

    ... too late to die young :)

    --- Msged/LNX 6.1.2 (Linux/5.9.1-gentoo-x86_64 (x86_64))
    * Origin: I will always keep a PC running CPM 3.0 (2:230/0)