I wanted to move this to the correct Area. I am not getting listed on the InterBBS user list. Is this in your services.ini? Yes > > > ActiveUser-UDP service enabled in you > > > services.ini:
> > > [ActiveUser-UDP]
> > > Port=11 > > > MaxClients=10
> > > LogLevel=Notice > > > Options=UDP | NO_HOST_LOOKUP > > > Command=fingerservice.js -u
> > Yes it is
> Well it seems to be working now: No it is not. I am still not listed on the user list. I will give you or anyone that can help full administrator access to trouble shoot the problem.
HusTler
havens.synchro.net:23

---
þ Synchronet þ Havens BBS havens.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Problem with Interbbs messaging
By: HusTler to All on Mon Sep 21 2020 08:29 am

Here is a copy of my services.ini. Is everthing correct to be listed on interbbs messaging? ; ctrl/services.ini file; Each section is a service, the [section name] is the service/protocol name (by default); $Id: services.ini,v 1.13 2019/01/01 12:28:52 rswindell Exp $; Global keys supported (in root section and/or per service section):; LogLevel (default: LogLevel specified in sbbs.ini); StackSize (Thread stack size, advanced use only, default: 0 - unspecified); MaxClients (default: 0 - unlimited); ListenBacklog (valid for TCP services only, default: 5); Options (default: 0, see below for valid bit flag definitions)MaxClients=10ListenBacklog=5; Each service also supports the following keys:; Enabled (default: true); Command (command-line to execute); Protocol (default: service/section name); Port (TCP/UDP port number or name, default: look-up TCP or UDP port by service/protocol name); Interface (default: network interface IP address specified in sbbs.ini [services]); Host (default: unspecified) - only run on the specified hostname; NotHost (default: unspecified) - do not run on the specified hostname; Advanced JavaScript execution keys:; JavaScriptMaxBytes; JavaScriptContextStack; JavaScriptThreadStack; JavaScriptBranchLimit; JavaScriptGcInterval; JavaScriptYieldInterval; Supported Options bit flags (separated with |):; NO_HOST_LOOKUP; NO_RECYCLE; MUTE; UDP; STATIC; LOOP; NATIVE; FULL_ACCEPT; Network News Transfer Protocol (NNTP)[NNTP]Port=119Command=nntpservice.js -f[NNTPS]Enabled=falsePort=563Options=TLSCommand=nntpservice.js[MSP]Port=18MaxC lients=10Command=mspservice.js; Message Send Protocol service (UDP)[MSP-UDP]Enabled=truePort=18Options=UDPCommand=mspservice.js; Active User service[ActiveUser]Port=11Command=fingerservice.js -u; Active User service[ActiveUser-UDP]Port=11MaxClients=10Loglevel=NoticeOptions=UDP | NO_HOST_LOOKUPCommand=fingerservice.js -u;QOTD service[QOTD]Enabled=truePort=17Command=qotdservice.js; QOTD service (UDP)[QOTD-UDP]Enabled=truePort=17Options=UDPCommand=qotdse
rvice.js; Finger Service[Finger]Port=79Command=fingerservice.js; Finger Service, fast (for inter-BBS instant-messaging)[Finger-UDP]Enabled=truePort=79Options=UDPCommand=fingerservi ce.js; Archaic HTTP-like protocol[Gopher]Port=70Command=gopherservice.js; Internet Relay Chat (IRC) Daemon (Server)[IRC]Port=6667Options=STATIC | LOOPCommand=ircd.js; JSON inter-bbs communications server[JSON]Port=10088Interface=127.0.0.1Options=STATIC | LOOPCommand=json-service.js[Hotline]Port=5500Command=hotline.jsMaxClients=20Ena bled=false[Hotline-TRANS]Port=5501Command=hotline-transfer.jsMaxClients=20Enabl ed=false[BINKP]Enabled=falsePort=24554Command=binkit.js[FlashPolicy]Port=843Com mand=flashpolicyserver.jsEnabled=false[WS]Port=1123Options=NO_HOST_LOOKUPComman d=websocketservice.js[WSS]Port=11235Options=NO_HOST_LOOKUP|TLSCommand=websocket service.js[MRC-Connector]Port=5000Options=STATIC | LOOPCommand=../xtrn/mrc/mrc-connector.js
HusTler
havens.synchro.net:23

---
þ Synchronet þ Havens BBS havens.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Problem with Interbbs messaging
By: HusTler to All on Mon Sep 21 2020 08:29 am

I wanted to move this to the correct Area. I am not getting listed on the InterBBS user list.

Is this in your services.ini?

Yes

ActiveUser-UDP service enabled in you
services.ini:

[ActiveUser-UDP]
Port=11
MaxClients=10
LogLevel=Notice
Options=UDP | NO_HOST_LOOKUP
Command=fingerservice.js -u

Yes it is

Well it seems to be working now:

No it is not.

By "working" I mean, at least one test method (http://cvs.synchro.net/scanmyports.ssjs?havens.synchro.net) is reporting that your systat service is responding.

I am still not listed on the user list. I will give you or
anyone that can help full administrator access to trouble shoot the

problem.

For some reason the nightly method of list verification isn't detecting your system as not responding to systat requests. Rather than debug the issue, I just added an override for your system so it should be listed in the distributed sbbsimsg.lst tomorrow.

digital man

Synchronet/BBS Terminology Definition #16:
CVS = Concurrent Versioning System
Norco, CA WX: 77.8øF, 59.0% humidity, 4 mph ESE wind, 0.00 inches rain/24hrs --- SBBSecho 3.11-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Problem with Interbbs messaging
By: Digital Man to HusTler on Mon Sep 21 2020 11:53 am

For some reason the nightly method of list verification isn't detecting

your > system as not responding to systat requests. Rather than debug the issue, I > just added an override for your system so it should be listed in the > distributed sbbsimsg.lst tomorrow. > digital man Thanks DM I'll be looking to cross this off my todo list. :)
HusTler
havens.synchro.net:23

---
þ Synchronet þ Havens BBS havens.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Problem with Interbbs messaging
By: Digital Man to HusTler on Mon Sep 21 2020 11:53 am

By "working" I mean, at least one test method (http://cvs.synchro.net/scanmyports.ssjs?havens.synchro.net) is reporting that your systat service is responding.

I used the method above to scan my ports. Whats the bare minimum that I need to open for the InterBBS chat to work? I've got MSP (18) and Finger (79) open now, and I suspect I need to open systat (11) as well. Do I really need finger (79) open?

Appreciate it.

|08~|07Bob|06Rob|08~

Bob

... I used to be indecisive; now I'm not sure.

---
þ Synchronet þ Halls of Valhalla - San Francisco, CA
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Problem with Interbbs messaging
By: Bob Roberts to Digital Man on Sat Oct 10 2020 03:32 pm

Re: Problem with Interbbs messaging
By: Digital Man to HusTler on Mon Sep 21 2020 11:53 am

By "working" I mean, at least one test method (http://cvs.synchro.net/scanmyports.ssjs?havens.synchro.net) is reporting that your systat service is responding.

I used the method above to scan my ports. Whats the bare minimum that I need to open for the InterBBS chat to work? I've got MSP (18) and Finger (79) open now, and I suspect I need to open systat (11) as well. Do I really need finger (79) open?

For inter-bbs instant messaging, you need TCP port 18 (MSP) and UDP port 11 (active-users/systat). You do not have to have finger port 79 (UDP or TCP) open.

digital man

Sling Blade quote #12:
Karl (re hammer): I don't rightly know. I just kinda woke up holding it.
Norco, CA WX: 70.1øF, 68.0% humidity, 11 mph NNE wind, 0.00 inches rain/24hrs --- SBBSecho 3.11-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)