1. Forum
  2. FidoNet
  3. SYNC SYSOPS

  • PETSCII port for C128 80 Col only seems to work if you set it to port

    From Keith Matthews@1:103/705 to GitLab issue in main/sbbs on Sat Sep 11 01:09:43 2021
    open https://gitlab.synchro.net/main/sbbs/-/issues/287

    Hi Rob,I thought I should let you know that I had a go at setting up the PETSCII Ports today.I found that I could set the C64 40 Col PETSCI port to pretty much anything (I used 64000) and it works fine.However with the C128 80Col PETSCII port, it only seems to work on Port 128. I had tried ports 1280, 12800 because I want to put them on high ports. But doing so I get Basic ASCII with uper and lower case swapped.Although in the Synchronet Log it says it recognized 80x25 PETSCII. How weird is that.Setting the Port to 128, it works brilliantly 8-) Love it.Just though I should let you know that the The C64 and C128 Ports are behaving differently.Thanks.8-))
    --- SBBSecho 3.14-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Rob Swindell@1:103/705 to GitLab note in main/sbbs on Sat Sep 11 10:04:45 2021
    https://gitlab.synchro.net/main/sbbs/-/issues/287#note_2073

    Cannot reproduce. Here's Vertrauen answering and recognizing a PETSCII 80-column terminal is on TCP port 1280:https://1drv.ms/u/s!ApZPvWcrEaRQyvg8ioC1HGyH6uC16g?e=RmRN3MRemember that *both* the TelnetInterface and the Pot80Port values will have to be adjusted for your new/different TCP port number.
    --- SBBSecho 3.14-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Rob Swindell@1:103/705 to GitLab issue in main/sbbs on Sat Sep 11 10:04:45 2021
    close https://gitlab.synchro.net/main/sbbs/-/issues/287
    --- SBBSecho 3.14-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Keith Matthews@1:103/705 to GitLab note in main/sbbs on Sat Sep 11 19:10:44 2021
    https://gitlab.synchro.net/main/sbbs/-/issues/287#note_2074

    Hi Rob,Thanks for the reply, I found the culprit!I had set it as Pet128Port rather than Pet80Port.What a duffus......8-)Thanks again 8-)Regards..GeoooooOOOOoooo
    --- SBBSecho 3.14-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Geo@1:103/705 to Rob Swindell on Sun Sep 12 12:07:56 2021
    Hi Rob,

    Thanks for the reply, I found the culprit!

    I had set it as Pet128Port rather than Pet80Port.

    What a duffus......8-)

    Thanks again 8-)


    Regards..Geo
    ooooOOOOoooo

    ---
    þ Synchronet þ The Dungeon BBS - Risen from the Ashes! - Canberra, Australia. http://bbs.barnab
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)