Who here uses the FTelnet program with WINServer??

Thanx
Joe

---
* Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

I do, you can see it on tfb-bbs.org.

You can use Ftelnet to login in via the web page or log in via the web and
then login again using Ftelnet and use web & telnet at the same time.

Terry

On Jul 08, 2020 12:51pm, Joe Schweier wrote to All:

Who here uses the FTelnet program with WINServer??

Thanx
Joe

---
* Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

... Platinum Xpress & Wildcat!..... Nice!!!!
--- Platinum Xpress/Win/WINServer v7.0
* Origin: The File Bank BBS! (3:640/1321)

I do, you can see it on tfb-bbs.org.

You can use Ftelnet to login in via the web page or log
in via the web and
then login again using Ftelnet and use web & telnet at
the same time.

Terry

On Jul 08, 2020 12:51pm, Joe Schweier wrote to All:

Who here uses the FTelnet program with WINServer??

I am having an absolute bitch of a time getting fTelnet running. It seem that every time I touch my BBS it sends me into a tail spin for days. I ran WINServer for years... had fTelnet for years... and the ephin thing wants to give me a rough time. No matter what way I want to install it it wants to go to the author's test BBS...

:(
Joe

---
* Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

Who here uses the FTelnet program with WINServer??

Thanx
Joe

Terry and I do. Use it for Telnet to bbs and RLogin to gamesrv.
--- Platinum Xpress/Win/WINServer v7.0
* Origin: WildCat Prison BBS, Mesquite Tx (1:124/5013)

Hi Joe,

Run the wizard and fill in your info.

http://embed-v2.ftelnet.ca/

Once that is done you can test and should be able to connect to your BBS.

Once it works, copy the code into the html page you will use to load Ftelnet.

Terry


On Jul 09, 2020 09:25am, Joe Schweier wrote to Terry Roati:

I do, you can see it on tfb-bbs.org.

You can use Ftelnet to login in via the web page or log
in via the web and
then login again using Ftelnet and use web & telnet at
the same time.

Terry

On Jul 08, 2020 12:51pm, Joe Schweier wrote to All:

Who here uses the FTelnet program with WINServer??

I am having an absolute bitch of a time getting fTelnet running. It
seem that every time I touch my BBS it sends me into a tail spin for
days. I ran WINServer for years... had fTelnet for years... and the
ephin thing wants to give me a rough time. No matter what way I want
to install it it wants to go to the author's test BBS...

:(
Joe

---
* Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

... Platinum Xpress & Wildcat!..... Nice!!!!
--- Platinum Xpress/Win/WINServer v7.0
* Origin: The File Bank BBS! (3:640/1321)

On 10 Jul 2020, Terry Roati said the following...

Hi Joe,

Run the wizard and fill in your info.

http://embed-v2.ftelnet.ca/

Once that is done you can test and should be able to connect to your BBS.

Once it works, copy the code into the html page you will use to load Ftelnet.

Terry

Did that.... before I wrote the post. I have trierd the 2 ways... The one where you run the files local and the way where you use cut and paste the
info to your web page.... When I test it on fTelnet site... it works.... once
I cut and paste the info into my web page it connects with the fTelnet test website. If I use the self hosting mode it trys to connct to the fTelnet
site as well. No where in my setup is there address and I'm at odds with the issue.
I have had it working in the past, for years, and now I cannot get it running... piss me off. I did change internet providers... but I have no clue...

Thanx

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-= JoesBBS.Com =-

--- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
* Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)

Hi Joe,


On Jul 10, 2020 11:40am, Ib Joe wrote to Terry Roati:

Did that.... before I wrote the post. I have trierd the 2 ways... The
one where you run the files local and the way where you use cut and
paste the info to your web page.... When I test it on fTelnet site...
it works.... once I cut and paste the info into my web page it connects with the fTelnet test website. If I use the self hosting mode it trys
to connct to the fTelnet site as well. No where in my setup is there address and I'm at odds with the issue.
I have had it working in the past, for years, and now I cannot get it running... piss me off. I did change internet providers... but I have
no clue...

All I can think of is that maybe one of the ports required is not open in
your firewall. If it works from Ftlenet site then the issue is definitely at your end.

Terry

... Platinum Xpress & Wildcat!..... Nice!!!!
--- Platinum Xpress/Win/WINServer v7.0
* Origin: The File Bank BBS! (3:640/1321)

On 11 Jul 2020, Terry Roati said the following...

Hi Joe,

On Jul 10, 2020 11:40am, Ib Joe wrote to Terry Roati:

Did that.... before I wrote the post. I have trierd the 2 ways...

Th

one where you run the files local and the way where you use cut and paste the info to your web page.... When I test it on fTelnet

site...

it works.... once I cut and paste the info into my web page it

connec

with the fTelnet test website. If I use the self hosting mode it

try

to connct to the fTelnet site as well. No where in my setup is

there

address and I'm at odds with the issue.
I have had it working in the past, for years, and now I cannot get

it

running... piss me off. I did change internet providers... but I

hav

no clue...

All I can think of is that maybe one of the ports required is not open
in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

Terry

I have the same thinking.... no clue... works on the test butg doesn't work when I cut and paste it over...

Wrote the author a message ... no answer yet...

:(

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-= JoesBBS.Com =-

--- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
* Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)

All I can think of is that maybe one of the ports required is no
in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

Terry

I have the same thinking.... no clue... works on the test butg
doesn't work when I cut and paste it over...

Wrote the author a message ... no answer yet...

Please keep us posted.


--- InterEcho 1.20
* Origin: Omicron Theta/2 * os2bbs.us * Southaven MS (1:261/20)

On 12 Jul 2020, Robert Wolfe said the following...

All I can think of is that maybe one of the ports required is no in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

Terry

I have the same thinking.... no clue... works on the test butg
doesn't work when I cut and paste it over...

Wrote the author a message ... no answer yet...

Please keep us posted.

No problem..

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-= JoesBBS.Com =-

--- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
* Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)

On 12 Jul 2020, Robert Wolfe said the following...

All I can think of is that maybe one of the ports required is no in your firewall. If it works from Ftlenet site then the issue is definitely at your end.

Terry

I have the same thinking.... no clue... works on the test butg
doesn't work when I cut and paste it over...

Wrote the author a message ... no answer yet...

Please keep us posted.

I'm almost there.... piss me off... I using back ups of back ups and and I
was always editing the wrong file. You have no idea how many times I was playing with the wrong html file. Now I'm getting an ftelnet error... at
least it's not what I was getting

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-= JoesBBS.Com =-

--- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
* Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)