1. Forum
  2. Usenet
  3. REC.CRAFTS.METALWORKING

  • career hustle LI - made possible by recent Contact Form

    From Richard Smith@21:1/5 to All on Mon Jul 10 16:12:00 2023
    Copy of "hustling" message on "LinkedIn".
    The elevation of my perspective and the confidence on my feet/
    foundations has gone rapid upwards recently.

    I had a lot of confidence knocked out of me by a succession of knocks
    whose combined effect I could not disentangle and comprehend until I
    reached being older and wiser.

    Message might be quixotic, but in what way is that my problem?! :-)

    Copy of message...


    ----------------------------------------------------------------


    With my 60th birthday imminent, I am granted a grand overview of
    technical endeavour.

    These are commercially high-value topics I have developed an interest
    in. I present these specific interests, for anyone who is themselves
    wrestling with these issues and wants to interact. Seen on my own
    "weldsmith" website. Both are about observations I seek to test again
    and find if they can be reliably replicated as part of a design basis:

    *
    Fatigue-resistant welds
    The indication is that cyclic stresses welded steel structures could
    bear could be at-least doubled. http://weldsmith.co.uk/tech/fatgres/210209_hiperfstrlstl_intro/210209_hiperfstrlstl_intro.html
    "Invitation to take interest in high-performance steel structures for cyclic-loading ("fatiguing") applications"

    * Aluminium MIG / Aluminum GMAW quality-controlled welds
    I suspect pre-electronics welding conditions used in the USA give the
    best welds achievable for most Ali welds at greater than 3mm =
    1/8th-inch thickness http://weldsmith.co.uk/tech/welding/weld_qual/221128_alimig/221128_ali_mig_qualctrl.html
    "Ali MIG/GMAW welding with quality control"

    I am easy to contact when on my website

    My CV can be read at
    http://weldsmith.co.uk/cv/

    I am currently busy with residential buildings renovation, but could
    give full attention on these topics if offered a suitable role.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jim Wilkins@21:1/5 to All on Mon Jul 10 21:24:26 2023
    "Richard Smith" wrote in message news:ly1qhf3inz.fsf@void.com...
    ....
    My CV can be read at
    http://weldsmith.co.uk/cv/

    ---------------------

    That might get you an (unenviable) position negotiating Union contracts.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Richard Smith@21:1/5 to Jim Wilkins on Tue Jul 11 08:16:47 2023
    "Jim Wilkins" <muratlanne@gmail.com> writes:

    "Richard Smith" wrote in message news:ly1qhf3inz.fsf@void.com... ....
    My CV can be read at
    http://weldsmith.co.uk/cv/

    ---------------------

    That might get you an (unenviable) position negotiating Union contracts.

    I'm a bit "thick" you know... :-)
    Mind explaining?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jim Wilkins@21:1/5 to Jim Wilkins on Tue Jul 11 06:49:57 2023
    "Richard Smith" wrote in message news:lya5w2sysg.fsf@void.com...

    "Jim Wilkins" <muratlanne@gmail.com> writes:

    "Richard Smith" wrote in message news:ly1qhf3inz.fsf@void.com... ....
    My CV can be read at
    http://weldsmith.co.uk/cv/

    ---------------------

    That might get you an (unenviable) position negotiating Union contracts.

    I'm a bit "thick" you know... :-)
    Mind explaining?

    ----------------------

    You claimed strong knowledge of the technical problems and skill at
    negotiating a solution to a difficult conflict of interests on the Turkish bridge project. That's a rare combination of abilities and qualification to
    be handed more messy problems. My brother fell into that situation, hired to close down failing companies.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Richard Smith@21:1/5 to Jim Wilkins on Tue Jul 11 20:33:30 2023
    "Jim Wilkins" <muratlanne@gmail.com> writes:

    "Richard Smith" wrote in message news:lya5w2sysg.fsf@void.com...

    "Jim Wilkins" <muratlanne@gmail.com> writes:

    "Richard Smith" wrote in message news:ly1qhf3inz.fsf@void.com... ....
    My CV can be read at
    http://weldsmith.co.uk/cv/

    ---------------------

    That might get you an (unenviable) position negotiating Union contracts.

    I'm a bit "thick" you know... :-)
    Mind explaining?

    ----------------------

    You claimed strong knowledge of the technical problems and skill at negotiating a solution to a difficult conflict of interests on the
    Turkish bridge project. That's a rare combination of abilities and qualification to be handed more messy problems. My brother fell into
    that situation, hired to close down failing companies.

    Ahh, I see.
    No "danger" of that here...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)