Pressure washer wrapup
From
Snag@21:1/5 to
All on Fri May 24 10:14:29 2024
I did end up using the new carb , thought a first I wasn't going to
need it but ... I did not end up using the new unloader valve , it
stalled the motor when I let off the trigger - probably adjusted for too
high a relief pressure . The low pressure relief is disabled , I have to
hold the trigger open for it to start . I'm going to see if I can source
the correct parts , apparently a generic spring and ball ain't gonna cut
it . I did change the relief pressure setting on the old unloader ,
backed the screw off one full turn and now the original unloader is
functioning correctly . It too was stalling the motor when I released
the trigger .
Well , now I get to test the detergent supply and if that works I'm
going to wash the car - but not today , we're still having afternoon thunderstorms . Be kinda like having my own little car wash out here in
the woods .
--
Snag
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)