From Snag@21:1/5 to All on Wed Apr 23 16:59:50 2025
Once I figured out just what I have , it became easy ... I made a
fixture to hold the cutters at 14.5° and ground one of 3/16" and one
1/4" . Made a new stub thread piece to match the leadscrew and then
threaded the nut blank . It turned out well , the stub thread (about
2"long) is tight in the nut , which is good at this point . Now if the
guy I ordered aluminum stock for a nut holder would get off his ass and
ship the stock I could move forward to the next step .
--
Snag
We live in a time where intelligent people
are being silenced so that
stupid people won't be offended.