-
Satellites And Packet
From
Daryl Stout@316:36/20 to
All on Sun Aug 22 00:04:38 2021
NOTE: The N0KFQ BBS is no more, due to the deaths of the Sysop, K.O. Higgs (N0KFQ)(SK), and his wife, Billie (KB0WSA)(SK).
However, the basic format noted below should work with any amateur radio satellite. Just substitute the callsigns and hierarchial addresses, as
noted.
Daryl, WX4QZ
***
How To Send Packet Messages By Satellite
========================================
From : N0KFQ
To : USERS
Type/status : BN
Date/time : 13-Sep 09:46
BID (MID) : 27233_N0KFQ
Message # : 27233
Title : +Messages by Satellite
(This message has been read 1 times today.)
The W0SL satellite gateway has been set up specifically to provide a fast
means of sending personal mail on foreign routes via the packet satellites.
No bulletins and no foreign NTS traffic will be forwarded.
You will need to format the message you wish to send in a particular way.
As an example, you want to send a message to Jim, 4X1AB, whose Home BBS is 4X1YZ. At your BBS prompt send your message to;
SP REQSAT @ W0SL [REQuest SATellite at W0SL]
Rig problems. [Enter the subject as normal]
SP 4X1AB @ 4X1YZ.ISR.MDLE [Enter the REAL address as the FIRST
Hi Jim the rig has been.... [line of the message. A SPACE must exist
text text etc..... [between SP and the first callsign.
/ex
Add the FULL HIERARCHICAL ADDRESS, as shown above, it is REQUIRED for the correct routing of your message. Don't forget the "SP".
So to sum up, at your BBS prompt enter;
SP REQSAT @ W0SL
when asked for the subject enter whatever you like, such as;
TNC problems again!!!
When asked for the Message the VERY FIRST LINE must contain the REAL
address, including the HIERARCHICAL ADDRESS, such as;
SP 4X1AB @ 4X1YZ.ISR.MDLE
Don't forget the "SP". Do not put anything else on this first line!
Then on the following line, enter the rest of the message as you would normally, ending with the usual;
/EX
When the message arrives at W0SL it will be automatically re-addressed according to the first line of the message. The subject you entered will
be the same and ALL the headers will remain, so anyone doing a SR reply
will have the reply sent back to the BBS you entered the message on.
N0KFQ July 16, 2000
=== End of messsage #27233 to USERS from N0KFQ ---
--- SBBSecho 3.14-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (316:36/20)
-
From
Daryl Stout@316:36/20 to
All on Mon Nov 22 00:03:27 2021
NOTE: The N0KFQ BBS is no more, due to the deaths of the Sysop, K.O. Higgs (N0KFQ)(SK), and his wife, Billie (KB0WSA)(SK).
However, the basic format noted below should work with any amateur radio satellite. Just substitute the callsigns and hierarchial addresses, as
noted.
Daryl, WX4QZ
***
How To Send Packet Messages By Satellite
========================================
From : N0KFQ
To : USERS
Type/status : BN
Date/time : 13-Sep 09:46
BID (MID) : 27233_N0KFQ
Message # : 27233
Title : +Messages by Satellite
(This message has been read 1 times today.)
The W0SL satellite gateway has been set up specifically to provide a fast
means of sending personal mail on foreign routes via the packet satellites.
No bulletins and no foreign NTS traffic will be forwarded.
You will need to format the message you wish to send in a particular way.
As an example, you want to send a message to Jim, 4X1AB, whose Home BBS is 4X1YZ. At your BBS prompt send your message to;
SP REQSAT @ W0SL [REQuest SATellite at W0SL]
Rig problems. [Enter the subject as normal]
SP 4X1AB @ 4X1YZ.ISR.MDLE [Enter the REAL address as the FIRST
Hi Jim the rig has been.... [line of the message. A SPACE must exist
text text etc..... [between SP and the first callsign.
/ex
Add the FULL HIERARCHICAL ADDRESS, as shown above, it is REQUIRED for the correct routing of your message. Don't forget the "SP".
So to sum up, at your BBS prompt enter;
SP REQSAT @ W0SL
when asked for the subject enter whatever you like, such as;
TNC problems again!!!
When asked for the Message the VERY FIRST LINE must contain the REAL
address, including the HIERARCHICAL ADDRESS, such as;
SP 4X1AB @ 4X1YZ.ISR.MDLE
Don't forget the "SP". Do not put anything else on this first line!
Then on the following line, enter the rest of the message as you would normally, ending with the usual;
/EX
When the message arrives at W0SL it will be automatically re-addressed according to the first line of the message. The subject you entered will
be the same and ALL the headers will remain, so anyone doing a SR reply
will have the reply sent back to the BBS you entered the message on.
N0KFQ July 16, 2000
=== End of messsage #27233 to USERS from N0KFQ ---
--- SBBSecho 3.14-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (316:36/20)
-
From
Daryl Stout@316:36/20 to
All on Mon Aug 22 00:08:23 2022
NOTE: The N0KFQ BBS is no more, due to the deaths of the Sysop, K.O. Higgs (N0KFQ)(SK), and his wife, Billie (KB0WSA)(SK).
However, the basic format noted below should work with any amateur radio satellite. Just substitute the callsigns and hierarchial addresses, as
noted.
Daryl, WX4QZ
***
How To Send Packet Messages By Satellite
========================================
From : N0KFQ
To : USERS
Type/status : BN
Date/time : 13-Sep 09:46
BID (MID) : 27233_N0KFQ
Message # : 27233
Title : +Messages by Satellite
(This message has been read 1 times today.)
The W0SL satellite gateway has been set up specifically to provide a fast
means of sending personal mail on foreign routes via the packet satellites.
No bulletins and no foreign NTS traffic will be forwarded.
You will need to format the message you wish to send in a particular way.
As an example, you want to send a message to Jim, 4X1AB, whose Home BBS is 4X1YZ. At your BBS prompt send your message to;
SP REQSAT @ W0SL [REQuest SATellite at W0SL]
Rig problems. [Enter the subject as normal]
SP 4X1AB @ 4X1YZ.ISR.MDLE [Enter the REAL address as the FIRST
Hi Jim the rig has been.... [line of the message. A SPACE must exist
text text etc..... [between SP and the first callsign.
/ex
Add the FULL HIERARCHICAL ADDRESS, as shown above, it is REQUIRED for the correct routing of your message. Don't forget the "SP".
So to sum up, at your BBS prompt enter;
SP REQSAT @ W0SL
when asked for the subject enter whatever you like, such as;
TNC problems again!!!
When asked for the Message the VERY FIRST LINE must contain the REAL
address, including the HIERARCHICAL ADDRESS, such as;
SP 4X1AB @ 4X1YZ.ISR.MDLE
Don't forget the "SP". Do not put anything else on this first line!
Then on the following line, enter the rest of the message as you would normally, ending with the usual;
/EX
When the message arrives at W0SL it will be automatically re-addressed according to the first line of the message. The subject you entered will
be the same and ALL the headers will remain, so anyone doing a SR reply
will have the reply sent back to the BBS you entered the message on.
N0KFQ July 16, 2000
=== End of messsage #27233 to USERS from N0KFQ ---
--- SBBSecho 3.15-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (316:36/20)
-
From
Daryl Stout@316:36/20 to
All on Wed Feb 22 00:10:13 2023
NOTE: The N0KFQ BBS is no more, due to the deaths of the Sysop, K.O. Higgs (N0KFQ)(SK), and his wife, Billie (KB0WSA)(SK).
However, the basic format noted below should work with any amateur radio satellite. Just substitute the callsigns and hierarchial addresses, as
noted.
Daryl, WX4QZ
***
How To Send Packet Messages By Satellite
========================================
From : N0KFQ
To : USERS
Type/status : BN
Date/time : 13-Sep 09:46
BID (MID) : 27233_N0KFQ
Message # : 27233
Title : +Messages by Satellite
(This message has been read 1 times today.)
The W0SL satellite gateway has been set up specifically to provide a fast
means of sending personal mail on foreign routes via the packet satellites.
No bulletins and no foreign NTS traffic will be forwarded.
You will need to format the message you wish to send in a particular way.
As an example, you want to send a message to Jim, 4X1AB, whose Home BBS is 4X1YZ. At your BBS prompt send your message to;
SP REQSAT @ W0SL [REQuest SATellite at W0SL]
Rig problems. [Enter the subject as normal]
SP 4X1AB @ 4X1YZ.ISR.MDLE [Enter the REAL address as the FIRST
Hi Jim the rig has been.... [line of the message. A SPACE must exist
text text etc..... [between SP and the first callsign.
/ex
Add the FULL HIERARCHICAL ADDRESS, as shown above, it is REQUIRED for the correct routing of your message. Don't forget the "SP".
So to sum up, at your BBS prompt enter;
SP REQSAT @ W0SL
when asked for the subject enter whatever you like, such as;
TNC problems again!!!
When asked for the Message the VERY FIRST LINE must contain the REAL
address, including the HIERARCHICAL ADDRESS, such as;
SP 4X1AB @ 4X1YZ.ISR.MDLE
Don't forget the "SP". Do not put anything else on this first line!
Then on the following line, enter the rest of the message as you would normally, ending with the usual;
/EX
When the message arrives at W0SL it will be automatically re-addressed according to the first line of the message. The subject you entered will
be the same and ALL the headers will remain, so anyone doing a SR reply
will have the reply sent back to the BBS you entered the message on.
N0KFQ July 16, 2000
=== End of messsage #27233 to USERS from N0KFQ ---
--- SBBSecho 3.20-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (316:36/20)
-
From
Daryl Stout@316:36/9 to
All on Mon May 22 00:03:40 2023
NOTE: The N0KFQ BBS is no more, due to the deaths of the Sysop, K.O. Higgs (N0KFQ)(SK), and his wife, Billie (KB0WSA)(SK).
However, the basic format noted below should work with any amateur radio satellite. Just substitute the callsigns and hierarchial addresses, as
noted.
Daryl, WX4QZ
***
How To Send Packet Messages By Satellite
========================================
From : N0KFQ
To : USERS
Type/status : BN
Date/time : 13-Sep 09:46
BID (MID) : 27233_N0KFQ
Message # : 27233
Title : +Messages by Satellite
(This message has been read 1 times today.)
The W0SL satellite gateway has been set up specifically to provide a fast
means of sending personal mail on foreign routes via the packet satellites.
No bulletins and no foreign NTS traffic will be forwarded.
You will need to format the message you wish to send in a particular way.
As an example, you want to send a message to Jim, 4X1AB, whose Home BBS is 4X1YZ. At your BBS prompt send your message to;
SP REQSAT @ W0SL [REQuest SATellite at W0SL]
Rig problems. [Enter the subject as normal]
SP 4X1AB @ 4X1YZ.ISR.MDLE [Enter the REAL address as the FIRST
Hi Jim the rig has been.... [line of the message. A SPACE must exist
text text etc..... [between SP and the first callsign.
/ex
Add the FULL HIERARCHICAL ADDRESS, as shown above, it is REQUIRED for the correct routing of your message. Don't forget the "SP".
So to sum up, at your BBS prompt enter;
SP REQSAT @ W0SL
when asked for the subject enter whatever you like, such as;
TNC problems again!!!
When asked for the Message the VERY FIRST LINE must contain the REAL
address, including the HIERARCHICAL ADDRESS, such as;
SP 4X1AB @ 4X1YZ.ISR.MDLE
Don't forget the "SP". Do not put anything else on this first line!
Then on the following line, enter the rest of the message as you would normally, ending with the usual;
/EX
When the message arrives at W0SL it will be automatically re-addressed according to the first line of the message. The subject you entered will
be the same and ALL the headers will remain, so anyone doing a SR reply
will have the reply sent back to the BBS you entered the message on.
N0KFQ July 16, 2000
=== End of messsage #27233 to USERS from N0KFQ ---
--- SBBSecho 3.20-Win32
* Origin: The Thunderbolt BBS - Little Rock, Arkansas (316:36/9)