[continued from previous message]

[ 0.985458] evm: security.selinux
[ 0.985461] evm: security.SMACK64 (disabled)
[ 0.985464] evm: security.SMACK64EXEC (disabled)
[ 0.985467] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.985470] evm: security.SMACK64MMAP (disabled)
[ 0.985472] evm: security.apparmor
[ 0.985475] evm: security.ima
[ 0.985478] evm: security.capability
[ 0.985480] evm: HMAC attrs: 0x1
[ 0.987721] RAS: Correctable Errors collector initialized.
[ 1.006594] clk: Disabling unused clocks
[ 1.006600] PM: genpd: Disabling unused power domains
[ 1.007741] Freeing unused decrypted memory: 2028K
[ 1.008121] Freeing unused kernel image (initmem) memory: 4148K
[ 1.008131] Write protecting the kernel read-only data: 28672k
[ 1.008355] Freeing unused kernel image (rodata/data gap) memory: 520K
[ 1.038238] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.038246] Run /init as init process
[ 1.038248] with arguments:
[ 1.038249] /init
[ 1.038250] with environment:
[ 1.038251] HOME=/
[ 1.038252] TERM=linux
[ 1.038253] BOOT_IMAGE=/boot/vmlinuz-6.12.27-amd64
[ 1.146024] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQBC data block query control method not found
[ 1.147031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.147070] ACPI: button: Power Button [PWRB]
[ 1.147189] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.147221] ACPI: button: Lid Switch [LID]
[ 1.162502] hid: raw HID events driver (C) Jiri Kosina
[ 1.175402] ACPI: bus type drm_connector registered
[ 1.177921] ACPI: bus type USB registered
[ 1.177942] usbcore: registered new interface driver usbfs
[ 1.177949] usbcore: registered new interface driver hub
[ 1.177961] usbcore: registered new device driver usb
[ 1.218178] ACPI: battery: Slot [BAT1] (battery present)
[ 1.221505] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.221510] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 1.222215] i2c i2c-2: Successfully instantiated SPD at 0x50
[ 1.222876] i2c i2c-2: Successfully instantiated SPD at 0x51
[ 1.222914] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.223534] i2c i2c-4: Successfully instantiated SPD at 0x50
[ 1.224138] i2c i2c-4: Successfully instantiated SPD at 0x51
[ 1.369702] xhci_hcd 0000:03:00.3: xHCI Host Controller
[ 1.369710] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
[ 1.369764] input: DELL0CAB:00 06CB:CFCB Mouse as /devices/platform/AMDI0010:03/i2c-1/i2c-DELL0CAB:00/0018:06CB:CFCB.0001/input/input3
[ 1.369846] input: DELL0CAB:00 06CB:CFCB Touchpad as /devices/platform/AMDI0010:03/i2c-1/i2c-DELL0CAB:00/0018:06CB:CFCB.0001/input/input4
[ 1.369926] hid-generic 0018:06CB:CFCB.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0CAB:00 06CB:CFCB] on i2c-DELL0CAB:00
[ 1.370155] xhci_hcd 0000:03:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000010
[ 1.370379] xhci_hcd 0000:03:00.3: xHCI Host Controller
[ 1.370381] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[ 1.370383] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.370429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.370431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.370433] usb usb1: Product: xHCI Host Controller
[ 1.370434] usb usb1: Manufacturer: Linux 6.12.27-amd64 xhci-hcd
[ 1.370435] usb usb1: SerialNumber: 0000:03:00.3
[ 1.370545] hub 1-0:1.0: USB hub found
[ 1.370563] hub 1-0:1.0: 5 ports detected
[ 1.372027] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 1.372093] nvme nvme0: pci function 0000:02:00.0
[ 1.372361] tsc: Refined TSC clocksource calibration: 3194.001 MHz
[ 1.372366] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a2765c9e, max_idle_ns: 440795366920 ns
[ 1.372406] clocksource: Switched to clocksource tsc
[ 1.373110] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 1.373251] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 1.373345] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 1.374374] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.374400] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 1.374403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.374405] usb usb2: Product: xHCI Host Controller
[ 1.374407] usb usb2: Manufacturer: Linux 6.12.27-amd64 xhci-hcd
[ 1.374408] usb usb2: SerialNumber: 0000:03:00.3
[ 1.374509] hub 2-0:1.0: USB hub found
[ 1.374530] hub 2-0:1.0: 2 ports detected
[ 1.375970] xhci_hcd 0000:03:00.4: xHCI Host Controller
[ 1.375974] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
[ 1.376411] xhci_hcd 0000:03:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 1.376546] nvme nvme0: D3 entry latency set to 10 seconds
[ 1.376611] xhci_hcd 0000:03:00.4: xHCI Host Controller
[ 1.376615] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4
[ 1.376618] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.376652] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.376655] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376657] usb usb3: Product: xHCI Host Controller
[ 1.376658] usb usb3: Manufacturer: Linux 6.12.27-amd64 xhci-hcd
[ 1.376660] usb usb3: SerialNumber: 0000:03:00.4
[ 1.376759] hub 3-0:1.0: USB hub found
[ 1.376781] hub 3-0:1.0: 1 port detected
[ 1.377664] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.377688] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 1.377691] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.377692] usb usb4: Product: xHCI Host Controller
[ 1.377694] usb usb4: Manufacturer: Linux 6.12.27-amd64 xhci-hcd
[ 1.377695] usb usb4: SerialNumber: 0000:03:00.4
[ 1.377793] hub 4-0:1.0: USB hub found
[ 1.377804] hub 4-0:1.0: 1 port detected
[ 1.378109] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.378581] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 1.378585] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 5
[ 1.378958] xhci_hcd 0000:05:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 1.379491] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 1.379497] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 6
[ 1.379502] xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.379565] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.379570] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.379573] usb usb5: Product: xHCI Host Controller
[ 1.379575] usb usb5: Manufacturer: Linux 6.12.27-amd64 xhci-hcd
[ 1.379577] usb usb5: SerialNumber: 0000:05:00.3
[ 1.379738] hub 5-0:1.0: USB hub found
[ 1.379766] hub 5-0:1.0: 1 port detected
[ 1.380215] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13

[continued in next message]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)