[continued from previous message]

completed (elapsed 0.001 seconds) [ 1561.736740] OOM killer disabled. [ 1561.736742] Freezing remaining freezable tasks [ 1561.738011] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 1561.739235] printk: Suspending console(s) (use no_console_suspend to debug) [ 1561.918624] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1561.920904] ata1.00: Entering standby power mode [ 1561.948048] parport_pc 00:05: disabled [ 1561.998497] e1000e: EEE TX LPI TIMER: 00000000 [ 1562.934048] ACPI: EC: interrupt blocked [ 1562.946632] ACPI: PM: Preparing to enter system sleep state S3 [ 1562.948507] ACPI: EC: event blocked [ 1562.948508] ACPI: EC: EC stopped [ 1562.948509] ACPI: PM: Saving platform NVS memory [ 1562.957578] Disabling non-boot CPUs ... [ 1562.959252] smpboot: CPU 1 is
now offline [ 1562.963224] ACPI: PM: Low-level resume complete [
1562.963224] ACPI: EC: EC started [ 1562.963224] ACPI: PM: Restoring
platform NVS memory [ 1562.963224] Enabling non-boot CPUs ... [ 1562.963224] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1562.966826] Disabled fast string operations [ 1562.969562] CPU1 is up [ 1562.972484] ACPI: PM: Waking up from system sleep state S3 [ 1562.989565] ACPI: EC: interrupt unblocked [ 1562.990363] firewire_ohci 0000:85:09.0: proprietary Ricoh MMC controller disabled (via FireWire function) [ 1562.990367] firewire_ohci 0000:85:09.0: MMC cards are now supported by standard SDHCI controller [ 1563.719561]
ACPI: EC: event unblocked [ 1563.719982] usb usb3: root hub lost power or
was reset [ 1563.720076] usb usb4: root hub lost power or was reset [ 1563.720165] usb usb5: root hub lost power or was reset [ 1563.722388] usb usb7: root hub lost power or was reset [ 1563.722479] usb usb8: root hub
lost power or was reset [ 1563.723231] usb usb6: root hub lost power or was reset [ 1563.723272] sdhci-pci 0000:85:09.1: Will use DMA mode even though
HW doesn't fully claim to support it. [ 1563.723283] sdhci-pci 0000:85:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1563.754580] i915 0000:00:02.0: [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling [ 1563.994622] usb 3-1: reset full-speed USB device number 2 using uhci_hcd [ 1564.073340] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1564.073372] ata6: SATA link down (SStatus 0 SControl 300) [ 1564.162619] pcieport
0000:00:1c.4: pciehp: Timeout on hotplug command 0x0018 (issued 1176 msec ago) [ 1564.174576] pcieport 0000:00:1c.2: pciehp: Timeout on hotplug
command 0x0018 (issued 1188 msec ago) [ 1564.174596] pcieport 0000:00:1c.0: pciehp: Timeout on hotplug command 0x0018 (issued 1188 msec ago) [ 1564.186610] pcieport 0000:00:1c.1: pciehp: Timeout on hotplug command
0x0018 (issued 1196 msec ago) [ 1564.247007] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1564.249752] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 1564.289600] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1564.289608] ata2.00: configured for UDMA/100 [ 1564.310733] firewire_core 0000:85:09.0: rediscovered device fw0 [ 1564.411367] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0 [ 1564.588799] parport_pc 00:05: activated [ 1564.635333] OOM killer enabled. [ 1564.635336] Restarting tasks ... [ 1564.636025] usb 4-1: USB disconnect, device number 2 [ 1564.636099] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.636105] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.636111] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.636117] yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.636123] yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.636293] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.636296] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.636302] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.636308] yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.636314] yenta_cardbus 0000:85:09.2:
bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.636376] done. [
1564.636386] random: crng reseeded on system resumption [ 1564.642859] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.642867] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.642874] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.642879] yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.642886] yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.643075] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.643079] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.643084] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.643090] yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.643096] yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.643260] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.643263] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.643269] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.643274] yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.643280] yenta_cardbus 0000:85:09.2: bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.643437] yenta_cardbus 0000:85:09.2: CardBus bridge to [bus 86] [ 1564.643440] yenta_cardbus 0000:85:09.2: bridge window [io 0x2000-0x20ff] [ 1564.643446] yenta_cardbus 0000:85:09.2: bridge window [io 0x2400-0x24ff] [ 1564.643451] yenta_cardbus 0000:85:09.2: bridge window [mem 0xdc000000-0xdfffffff pref] [ 1564.643457] yenta_cardbus 0000:85:09.2:
bridge window [mem 0xf0000000-0xf3ffffff] [ 1564.698966] video LNXVIDEO:00: Restoring backlight state [ 1564.699149] PM: suspend exit [ 1564.758625] usb 4-1: new full-speed USB device number 3 using uhci_hcd [ 1564.790780] ata7: found unknown device (class 0) [ 1564.790808] ata7: found unknown device (class 0) [ 1564.904859] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [ 1564.939342] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03 [ 1564.939352] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1564.939355] usb 4-1: Product: Fingerprint
Sensor [ 1565.281421] psmouse serio4: synaptics: queried max coordinates: x [..5694], y [..5048] [ 1566.162634] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1566.164512] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1566.164944] sd 0:0:0:0: [sda] Starting disk [ 1566.167069] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1566.167452] ata1.00: configured for UDMA/100 [ 1567.295330]
Bluetooth: MGMT ver 1.23 [ 1568.377609] wls1: authenticate with d8:32:14:64:a6:4d (local address=00:21:6a:a9:a0:d2) [ 1568.377621] wls1:
send auth to d8:32:14:64:a6:4d (try 1/3) [ 1568.380034] wls1: authenticated
[ 1568.382636] wls1: associate with d8:32:14:64:a6:4d (try 1/3) [ 1568.386289] wls1: RX AssocResp from d8:32:14:64:a6:4d (capab=0x411 status=0

[continued in next message]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)