[continued from previous message]

[    1.685604] x86/mm: Checked W+X mappings: passed, no W+X pages found. [    1.685621] Run /init as init process
[    1.685625]   with arguments:
[    1.685626]     /init
[    1.685627]   with environment:
[    1.685627]     HOME=/
[    1.685628]     TERM=linux
[    1.685629]     BOOT_IMAGE=/vmlinuz-6.12.33+deb13-amd64
[    1.750037] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.750058] ACPI: button: Power Button [PWRB]
[    1.750087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.750128] ACPI: button: Power Button [PWRF]
[    1.754001] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.754318] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2
[    1.755945] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    1.755947] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    1.756582] cryptd: max_cpu_qlen set to 1000
[    1.756939] i2c i2c-2: Successfully instantiated SPD at 0x51
[    1.758082] i2c i2c-2: Successfully instantiated SPD at 0x53
[    1.758093] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    1.761882] AES CTR mode by8 optimization enabled
[    1.763938] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    1.763982] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    1.764320] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    1.765106] SCSI subsystem initialized
[    1.765648] nvme 0000:04:00.0: platform quirk: setting simple suspend [    1.765650] nvme 0000:07:00.0: platform quirk: setting simple suspend [    1.765664] nvme 0000:08:00.0: platform quirk: setting simple suspend [    1.765697] nvme nvme1: pci function 0000:07:00.0
[    1.765699] nvme nvme0: pci function 0000:04:00.0
[    1.765725] nvme nvme2: pci function 0000:08:00.0
[    1.769513] ACPI: bus type USB registered
[    1.769525] usbcore: registered new interface driver usbfs
[    1.769528] usbcore: registered new interface driver hub
[    1.769532] usbcore: registered new device driver usb
[    1.771676] ACPI: bus type thunderbolt registered
[    1.771698] thunderbolt 0000:72:00.0: enabling device (0000 -> 0002) [    1.775202] ACPI: bus type drm_connector registered
[    1.777339] libata version 3.00 loaded.
[    1.777867] r8169 0000:0c:00.0 eth0: RTL8125B, 9c:6b:00:82:78:5a, XID 641, IRQ 68
[    1.777870] r8169 0000:0c:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.783342] nvme nvme0: 16/0/0 default/read/poll queues
[    1.785265]  nvme0n1: p1 p2 p3
[    1.816062] nvme nvme1: 16/0/0 default/read/poll queues
[    1.818833]  nvme1n1: p1 p2
[    1.880723] nvme nvme2: failed to allocate host memory buffer.
[    1.881376] nvme nvme2: 7/0/0 default/read/poll queues
[    1.886729] nvme nvme2: Ignoring bogus Namespace Identifiers
[    1.888075]  nvme2n1: p1
[    1.889407] r8169 0000:0c:00.0 enp12s0: renamed from eth0
[    1.892573] ahci 0000:0a:00.0: version 3.0
[    1.892579] ahci 0000:0a:00.0: enabling device (0000 -> 0003)
[    1.892721] ahci 0000:0a:00.0: SSS flag set, parallel bus scan disabled [    1.892754] ahci 0000:0a:00.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode
[    1.892755] ahci 0000:0a:00.0: 2/2 ports implemented (port mask 0x3) [    1.892756] ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc 
[    1.892888] scsi host0: ahci
[    1.892949] scsi host1: ahci
[    1.892973] ata1: SATA max UDMA/133 abar m512@0xdcc00000 port 0xdcc00100 irq 108 lpm-pol 3
[    1.892974] ata2: SATA max UDMA/133 abar m512@0xdcc00000 port 0xdcc00180 irq 108 lpm-pol 3
[    1.892988] ahci 0000:0e:00.0: enabling device (0000 -> 0002)
[    1.893065] ahci 0000:0e:00.0: SSS flag set, parallel bus scan disabled [    1.893088] ahci 0000:0e:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    1.893089] ahci 0000:0e:00.0: 4/6 ports implemented (port mask 0xf) [    1.893090] ahci 0000:0e:00.0: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    1.893266] scsi host2: ahci
[    1.893299] scsi host3: ahci
[    1.893328] scsi host4: ahci
[    1.893356] scsi host5: ahci
[    1.893384] scsi host6: ahci
[    1.893411] scsi host7: ahci
[    1.893422] ata3: SATA max UDMA/133 abar m1024@0xdc980000 port 0xdc980100 irq 109 lpm-pol 3
[    1.893427] ata4: SATA max UDMA/133 abar m1024@0xdc980000 port 0xdc980180 irq 109 lpm-pol 3
[    1.893428] ata5: SATA max UDMA/133 abar m1024@0xdc980000 port 0xdc980200 irq 109 lpm-pol 3
[    1.893429] ata6: SATA max UDMA/133 abar m1024@0xdc980000 port 0xdc980280 irq 109 lpm-pol 3
[    1.893430] ata7: DUMMY
[    1.893430] ata8: DUMMY
[    2.203789] ata3: SATA link down (SStatus 0 SControl 300)
[    2.324628] tsc: Refined TSC clocksource calibration: 4691.183 MHz [    2.324637] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x439ee417eeb, max_idle_ns: 440795249536 ns
[    2.324661] clocksource: Switched to clocksource tsc
[    2.360655] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [    2.361316] ata1.00: Model 'SanDisk SD7SB7S512G1122', rev 'X3540000', applying quirks: maxtrim128m
[    2.364931] ata1.00: ATA-9: SanDisk SD7SB7S512G1122, X3540000, max UDMA/133
[    2.364988] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.366270] ata1.00: Features: Dev-Sleep
[    2.368046] ata1.00: configured for UDMA/133
[    2.368239] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SD7SB7S5 0000 PQ: 0 ANSI: 5
[    2.679888] ata2: SATA link down (SStatus 0 SControl 300)
[    2.991785] ata4: SATA link down (SStatus 0 SControl 300)
[    3.303849] ata5: SATA link down (SStatus 0 SControl 300)
[    3.772637] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [    3.774816] ata6.00: Model 'Samsung SSD 850 PRO 256GB', rev 'EXM04B6Q', applying quirks: noncqtrim zeroaftertrim
[    3.774854] ata6.00: supports DRM functions and may not be fully accessible
[    3.774856] ata6.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM04B6Q, max UDMA/133
[    3.780159] ata6.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [    3.790796] ata6.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    3.790982] ata6.00: supports DRM functions and may not be fully accessible
[    3.806265] ata6.00: configured for UDMA/133
[    3.816636] ahci 0000:0e:00.0: port does not support device sleep
[    3.816814] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 850  4B6Q PQ: 0 ANSI: 5
[    3.818372] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    3.818376] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 1
[    3.821009] sd 5:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    3.821013] sd 5:0:0:0: [sdb] Write Protect is off
[    3.821014] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.821017] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.821024] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes

[continued in next message]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)