[continued from previous message]

[    3.885015] usb usb9: SerialNumber: 0000:74:00.0
[    3.885064] hub 9-0:1.0: USB hub found
[    3.885067] hub 9-0:1.0: 1 port detected
[    3.885235] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.885242] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    3.885243] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.885243] usb usb10: Product: xHCI Host Controller
[    3.885244] usb usb10: Manufacturer: Linux 6.12.33+deb13-amd64 xhci-hcd [    3.885244] usb usb10: SerialNumber: 0000:74:00.0
[    3.885271] hub 10-0:1.0: USB hub found
[    3.885273] hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    4.132353] usb 7-2: new full-speed USB device number 2 using xhci_hcd [    4.132366] usb 9-1: new full-speed USB device number 2 using xhci_hcd [    4.188348] usb 1-6: new high-speed USB device number 2 using xhci_hcd [    4.200372] usb 3-1: new full-speed USB device number 2 using xhci_hcd [    4.291968] usb 9-1: New USB device found, idVendor=26ce, idProduct=01a2, bcdDevice= 0.00
[    4.291970] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.291971] usb 9-1: Product: LED Controller
[    4.291972] usb 9-1: Manufacturer: ASRock
[    4.291972] usb 9-1: SerialNumber: A02019100900
[    4.294778] usb 7-2: New USB device found, idVendor=1038, idProduct=183a, bcdDevice= 1.b4
[    4.294780] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.294781] usb 7-2: Product: SteelSeries Aerox 3 Wireless
[    4.294782] usb 7-2: Manufacturer: SteelSeries
[    4.424100] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[    4.424104] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.424106] usb 1-6: Product: USB2.0 Hub
[    4.432225] hub 1-6:1.0: USB hub found
[    4.436089] hub 1-6:1.0: 4 ports detected
[    4.590621] usb 3-1: New USB device found, idVendor=3434, idProduct=0610, bcdDevice= 1.02
[    4.590626] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.590627] usb 3-1: Product: Keychron Q1 Pro
[    4.590628] usb 3-1: Manufacturer: Keychron
[    4.660339] usb 1-9: new full-speed USB device number 3 using xhci_hcd [    4.762064] hid: raw HID events driver (C) Jiri Kosina
[    4.765177] [drm] amdgpu kernel modesetting enabled.
[    4.765245] amdgpu: Virtual CRAT table created for CPU
[    4.765249] amdgpu: Topology: Add CPU node
[    4.765300] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[    4.765320] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x7550 0x1043:0x0618 0xC3).
[    4.765326] [drm] register mmio base: 0xDD300000
[    4.765326] [drm] register mmio size: 524288
[    4.768145] [drm] add ip block number 0 <soc24_common>
[    4.768145] [drm] add ip block number 1 <gmc_v12_0>
[    4.768146] [drm] add ip block number 2 <ih_v7_0>
[    4.768146] [drm] add ip block number 3 <psp>
[    4.768146] [drm] add ip block number 4 <smu>
[    4.768147] [drm] add ip block number 5 <dm>
[    4.768147] [drm] add ip block number 6 <gfx_v12_0>
[    4.768148] [drm] add ip block number 7 <sdma_v7_0>
[    4.768148] [drm] add ip block number 8 <vcn_v5_0_0>
[    4.768148] [drm] add ip block number 9 <jpeg_v5_0_0>
[    4.768148] [drm] add ip block number 10 <mes_v12_0>
[    4.768154] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[    4.768155] amdgpu: ATOM BIOS: 115-G295BP0-100
[    4.770319] Console: switching to colour dummy device 80x25
[    4.770339] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[    4.770340] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    4.770380] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    4.770384] amdgpu 0000:03:00.0: amdgpu: VRAM: 16304M 0x0000008000000000 - 0x00000083FAFFFFFF (16304M used)
[    4.770385] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    4.770387] [drm] Detected VRAM RAM=16304M, BAR=16384M
[    4.770388] [drm] RAM width 256bits GDDR6
[    4.770421] [drm] amdgpu: 16304M of VRAM memory ready
[    4.770422] [drm] amdgpu: 15838M of GTT memory ready.
[    4.770429] [drm] GART: num cpu pages 131072, num gpu pages 131072 [    4.770468] amdgpu 0000:03:00.0: amdgpu: PCIE GART of 512M enabled (table at 0x00000083DAB00000).
[    4.770646] [drm] Loading DMUB firmware via PSP: version=0x00010300 [    4.770905] [drm] Found VCN firmware Version ENC: 1.7 DEC: 9 VEP: 0 Revision: 19
[    4.810497] usbcore: registered new interface driver usbhid
[    4.810499] usbhid: USB HID core driver
[    4.811727] input: ASRock LED Controller as /devices/pci0000:00/0000:00:08.3/0000:74:00.0/usb9/9-1/9-1:1.0/0003:26CE:01A2.0001/input/input3
[    4.864378] hid-generic 0003:26CE:01A2.0001: input,hidraw0: USB HID v1.10 Device [ASRock LED Controller] on usb-0000:74:00.0-1/input
0
[    4.864438] input: SteelSeries SteelSeries Aerox 3 Wireless as /devices/pci0000:00/0000:00:08.1/0000:73:00.4/usb7/7-2/7-2:1.0/0003:1038:183A.0002/input/input4
[    4.864489] hid-generic 0003:1038:183A.0002: input,hidraw1: USB HID v1.11 Mouse [SteelSeries SteelSeries Aerox 3 Wireless] on usb-0000:73:00.4-2/input0
[    4.864542] input: SteelSeries SteelSeries Aerox 3 Wireless as /devices/pci0000:00/0000:00:08.1/0000:73:00.4/usb7/7-2/7-2:1.1/0003:1038:183A.0003/input/input5
[    4.964900] usb 1-9: New USB device found, idVendor=349e, idProduct=0202, bcdDevice= 1.00
[    4.964904] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.964906] usb 1-9: Product: FIDO2 Security Key
[    4.964907] usb 1-9: Manufacturer: TOKEN2
[    4.987818] input: TOKEN2 FIDO2 Security Key as /devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0d:00.0/usb1/1-9/1-9:1.0/0003:349E:0202.000A/input/input6
[    4.997254] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    4.997256] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    4.997278] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000002e, smu fw if version = 0x00000032, smu fw program = 0, smu fw version = 0x00684400 (104.68.0)
[    4.997279] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[    5.008440] hid-generic 0003:1038:183A.0003: input,hidraw2: USB HID v1.11 Keyboard [SteelSeries SteelSeries Aerox 3 Wireless] on usb-0000:73:00.4-2/input1
[    5.008688] input: SteelSeries SteelSeries Aerox 3 Wireless as /devices/pci0000:00/0000:00:08.1/0000:73:00.4/usb7/7-2/7-2:1.2/0003:1038:183A.0004/input/input7
[    5.024348] usb 1-6.3: new full-speed USB device number 4 using xhci_hcd [    5.051544] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully! [    5.051820] [drm] Display Core v3.2.301 initialized on DCN 4.0.1
[    5.051821] [drm] DP-HDMI FRL PCON supported
[    5.055285] [drm] DMUB hardware initialized: version=0x00010300
[    5.164746] hid-generic 0003:349E:0202.000A: input,hidraw3: USB HID v1.10 Keyboard [TOKEN2 FIDO2 Security Key] on usb-0000:0d:00.0-9/input0

[continued in next message]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)