How to Use VAG-COM 409.1 with Xstarter
VAG-COM 409.1 is a software that allows you to diagnose and modify the settings of your Volkswagen, Audi, Seat, or Skoda car. It works with a KKL cable that connects your car's OBD port to your computer's USB port. Xstarter is a program that lets you
automate tasks on your computer, such as launching applications, sending keystrokes, or executing commands.

In this article, we will show you how to use VAG-COM 409.1 with Xstarter to perform some common tasks on your car, such as reading fault codes, clearing service reminders, or adjusting idle speed. You will need the following items:

VAG-COM 409.1 xstarter
Download Zip https://t.co/1VrSVx9Nb9




A Windows computer with VAG-COM 409.1 installed. You can download it from here and follow the instructions to install it.
A KKL cable that is compatible with your car. You can buy one from here or other online stores.
Xstarter installed on your computer. You can download it from here and follow the instructions to install it.
Your car's ignition key and access to the OBD port.

Once you have everything ready, follow these steps:


Connect the KKL cable to your car's OBD port and to your computer's USB port. Make sure the drivers are installed correctly and the cable is recognized by your computer.
Launch VAG-COM 409.1 and select the correct port number for your cable. You can find it in the Device Manager under Ports (COM & LPT).
Select your car's model and engine type from the drop-down menus. Click on Test to make sure the connection is successful.
Launch Xstarter and create a new task. Give it a name and a description.
Select the Actions tab and click on Add Action. Choose Run Program from the list of actions.
Browse to the location of VAG-COM 409.1.exe and select it. In the Parameters field, enter the command line arguments for the task you want to perform. For example, if you want to read fault codes, enter /R /S /E /L /F /A /D /O /C /M /N /K /G /H /I /J /P /
Q /U /V /W /X /Y /Z. You can find more information about the command line arguments in the VAG-COM 409.1 manual.
Click on OK to save the action. You can add more actions if you want to perform more tasks.
Select the Triggers tab and click on Add Trigger. Choose how you want to start the task, such as by pressing a hotkey, by inserting a USB device, or by a schedule.
Click on OK to save the trigger. You can add more triggers if you want to start the task in different ways.
Click on OK to save the task. You can test it by clicking on Run Now or by using the trigger you set up.

Congratulations! You have successfully created a task that uses VAG-COM 409.1 with Xstarter to perform some common tasks on your car. You can create more tasks for different purposes and customize them according to your needs.
35727fac0c

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)