1. Forum
  2. Usenet
  3. SCI.ELECTRONICS.REPAIR

  • Forgotten lock code with a WEST P8100 temperature controller

    From Jean-Pierre Coulon@21:1/5 to All on Tue Jan 10 09:56:43 2023
    I can find any help about this in the manual. Is there a reset push button on the board, to recover a default code?

    Bye,

    Jean-Pierre Coulon

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Peter W.@21:1/5 to Jean-Pierre Coulon on Tue Jan 10 03:30:46 2023
    On Tuesday, January 10, 2023 at 3:56:58 AM UTC-5, Jean-Pierre Coulon wrote:
    I can find any help about this in the manual. Is there a reset push button on the board, to recover a default code?

    Bye,

    Jean-Pierre Coulon
    https://iseinc.com/process_and_temperature_controls.htm?gclid=Cj0KCQiAtvSdBhD0ARIsAPf8oNkYfQk984OW3d1TwKGbfBu0BJTT2CjVjEg9kBU1jde0P-WQaA0QwCkaAgUlEALw_wcB

    Will get you to the manual.

    Page 35 of the manual will get you what you want.

    The internet is your friend.

    Peter Wieck
    Melrose Park, PA

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Allodoxaphobia@21:1/5 to Peter W. on Tue Jan 10 14:38:40 2023
    On Tue, 10 Jan 2023 03:30:46 -0800 (PST), Peter W. wrote:

    The internet is your friend.

    ... and search engines are your escorts.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Adrian Caspersz@21:1/5 to Allodoxaphobia on Tue Jan 10 15:20:06 2023
    On 10/01/2023 14:38, Allodoxaphobia wrote:
    On Tue, 10 Jan 2023 03:30:46 -0800 (PST), Peter W. wrote:

    The internet is your friend.

    ... and search engines are your escorts.

    and AI, your pimp ...

    --
    Adrian C

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jean-Pierre Coulon@21:1/5 to Peter W. on Tue Jan 10 17:15:27 2023
    On Tue, 10 Jan 2023, Peter W. wrote:

    Page 35 of the manual will get you what you want.

    It says "in the event that a lock code is forgotten press..." but the Cloc display they claim never shows up!

    Jean-Pierre Coulon

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Peter W.@21:1/5 to Jean-Pierre Coulon on Tue Jan 10 09:53:27 2023
    On Tuesday, January 10, 2023 at 11:15:34 AM UTC-5, Jean-Pierre Coulon wrote:
    On Tue, 10 Jan 2023, Peter W. wrote:

    Page 35 of the manual will get you what you want.
    It says "in the event that a lock code is forgotten press..." but the Cloc display they claim never shows up!

    Jean-Pierre Coulon

    Press ^ & @ together *WHILST THE UNIT IS POWERING UP* until the CLoc display is shown.
    Once in this mode
    Press @ to step between lock modes.

    (I suspect that the manual means that you will be holding the ^ and the @ through the power-up process, not momentarily.)

    ^ = Raise Key
    @ = Function Key

    If there is another fault, you may have to read more in the manual. Page 32 does also show the default and entry modes for the locks.

    Peter Wieck
    Melrose Park, PA

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Charles Lucas@21:1/5 to Jean-Pierre Coulon on Tue Jan 10 11:30:19 2023
    On Tuesday, January 10, 2023 at 2:56:58 AM UTC-6, Jean-Pierre Coulon wrote:
    I can find any help about this in the manual. Is there a reset push button on the board, to recover a default code?

    Bye,

    Jean-Pierre Coulon

    Try 1234 or 9999 or 1111 or 0000?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)