Though this discussion occurred 11 years ago, I found it very helpful to consider fixes with my MSCAA charger.
In my case, the 3rd battery slot was acting up. If I put in 1 AAA battery by itself, it would charge OK. If I placed another AAA battery at the same time in another slot, the #3 LED would turn on a while then off.
I thought of replacing the A4800 for #3 as recommended here. However, when I opened the unit, I saw one of the terminals wiggled slightly. I reassembled the unit and ran an experiment to charge an AA battery instead of AAA. #3 didn't have a problem with
the AA.
I took it apart again and saw the + terminal AAA needed resoldering. This fixed it.
I actually didn't need to replace the A4800. It seems poor contact was causing trouble, affecting current flow.
I saw other terminals could benefit from resoldering, so I did.
Posting this in case others experience similar issues.
--
For full context, visit
https://www.electrondepot.com/repair/lenmar-mscaa-battery-charger-152580-.htm
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)