1. Forum
  2. Usenet
  3. SCI.ELECTRONICS.BASICS

  • 1.8mm Pitch Connectors

    From Bret Cahill@21:1/5 to All on Mon Jun 14 01:07:43 2021
    2.54mm connectors are easy to find. Is there anything off the shelf for 1.8mm?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jasen Betts@21:1/5 to Bret Cahill on Mon Jun 14 12:18:42 2021
    On 2021-06-14, Bret Cahill <bretcahill@aol.com> wrote:
    2.54mm connectors are easy to find. Is there anything off the shelf for 1.8mm?

    There's bound to be, is only the pitch important?

    --
    Jasen.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Bret Cahill@21:1/5 to All on Mon Jun 14 14:02:25 2021
    2.54mm connectors are easy to find. Is there anything off the shelf for 1.8mm?
    There's bound to be, is only the pitch important?

    I want to relocate some LEDS, a photo cell and indicator light that are connected by a 10 pin (2X5) connector.

    It would be nice to find a male for one end and female for the other end of ribbon wire, if not in a 2X5 then at least in those individual connectors like for DuPont 2.54 mm except smaller.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Michael Terrell@21:1/5 to Bret Cahill on Mon Jun 21 10:43:00 2021
    On Monday, June 14, 2021 at 4:07:45 AM UTC-4, Bret Cahill wrote:
    2.54mm connectors are easy to find. Is there anything off the shelf for 1.8mm?
    Samtec makes a lot in that series.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)