On Monday, 13 November 2023 at 12:16:40 UTC+11,
edpr...@gmail.com wrote:
On Friday, November 10, 2023 at 5:20:18 PM UTC-5, Arindam Banerjee wrote:
On Saturday, 11 November 2023 at 02:54:00 UTC+11, edpr...@gmail.com wrote:
[]
I will look at this a little more. This is how science is supposed to work.
But I have a new work assignment beginning next week, so I cannot spend much time on this. Going back and forth like this is not very efficient.
I have a suggestion for you: write up your experiment in a proper lab report
format that includes all the information about the lab equipment (measurement
devices, power supplies, materials), the procedure for running the experiment
(how to set up for the test, how to start and run the device, etc.), and the results
(nice that you include the raw data like the video). You might have to include
the video separately, but everything else could be in a document (PDF).
Quite, a good idea if I was funded to do that adequately by renowned establishments
who would also welcome me to give lectures, give me assistants, lots of publicity, etc. :-) :-)
As things are, I am satisfied with what I have done, and now I have other pressing matters to attend to.
I am confident that any competent technician can reproduce what I have done,
from all the information available on the 2-sec video.
A team of technicians could do that in a matter of hours.
I assure you that I am more than competent to analyze this experiment, but not from
poorly arranged and scattered lab notes and data.
My data and notes should be perfectly clear to those with a minimum honesty and intelligence.
I had answered your SCIENTIFIC queries earlier, in detail.
You have not made a single point to question my claim about the violation of inertia with my new design rail gun.
That is enough for me!
You should be able to write up the
suggested report in less time than you spend posting here complaining about how
the science community is persecuting you.
You have no business to tell me what I should do.
The reports are already there, presented here in this ng and to my engineering colleagues, and have been submitted to the Hon PM of Australia.
Text of my submission to the PM below:
****
I would respectfully like to bring to your kind attention our new discovery in physics that has enormous implications for advanced future technology. This discovery is as significant for the human race as the wheel, fire, electricity, etc.
The discovery is that the principle of inertia can be violated under certain engineering conditions. Many technical innovations and new commercial approaches are now possible from this discovery that will lead to vastly better futures for the coming
generations.
My invention of a new design electromagnetic rail gun has made this discovery possible. A working model of that gun, in motor mode, showing overall lack of recoil is shown in the link below. It shows the power stroke of a two-stroke engine that will give
a body a certain increase in velocity after every “hit”.
https://www.facebook.com/100000534193755/videos/pcb.7556513371043061/1006108110439305
Details about the above video may be obtained from the link below:
https://groups.google.com/g/sci.physics/c/VtFeGAkIABg/m/CLPzLRElAwAJ
My humble request to you, sir, is that you forward this link to your concerned Government departments dealing with new and innovative scientific research. My problem – learnt from bitter experience - is that as this discovery is so revolutionary, it
will not be possible for the academic world to grasp it as some of their dearest convictions will have to be overthrown. Their instinctive reaction is rejection. Such attitude makes journal publication impossible. Only urgent political pressure may
induce the more open-minded among them to take my work seriously, and from that, give me the notice that this discovery deserves.
So my fond hope is, sir, that as a result of your direct personal initiative, I be asked to give talks to a suitably empowered audience, who will review on a fair and unbiased basis my solo unsupported work in this field over the last 25 years. I have no
doubt that such an initiative will send the ball rolling for many new inventions in the areas of green energy and superfast safe green transport with a new class of reactionless electric motors.
Finally I would like you to know that this is a purely Australian invention and discovery. I rely upon my fine Aussie mates to help make the best use of it, for the good of Australia. In this context I would like to inform that the one-person company
that I founded in 2010, mentioned below, does novel research into the fundamental issues relating to energy and motion, to acquire Intellectual Property for commercialisation. There are no liabilities for this company, which ideally should serve as an
umbrella company for many other companies seeking to profit from this discovery/invention. Worthy partners are required, to realise the fruits of my research, so I request Australian Government support in finding such partners whom I could contact.
Expecting a favourable and constructive reply from your side and with deep regards,
*****
I have asked him to contact fair, honest and competent people to go through my 2 sec video, the graphs and the explanations, all online
Hopefully I will get a reply, but if not, I will contact other important people who should be interested.
If you don't want to do a little more work on your own experiment than I can't help you.
Then do not. Nobody asked YOU, sir. My work in this field, which in this case is presenting a new discovery as significant as fire, the wheel, electricity, etc. is for posterity to utilise.
Worked 25 years on this! Those who care to know, know all about it. Why they do not support me openly is the question, and I think I know the answer. So I understand.
Lazy and foolish people, careerists, bigots, vested interests, racists, political types etc. will ignore and obstruct, naturally.
And there are so many of them!
But life finds ways to overcome such resistances. I may not live to see the fruition of my new physics, if the opposition is too great.
So what, I will live up to the values of my scientific peers, none of them alive now, I am afraid. Work selflessly for the glory of Science, and the good of all that is animal, vegetable and mineral. Open new vistas. Tear down cages. Free the spirit!
I have no doubt, they can improve upon what I have done, if they place the rollers on a
large flat block of ice, for instance. Or use skis. In which case I would expect the reaction
to be even more pronounced, but the gun would keep on moving longer if slower.
Then they could experiement with making the gun heavier, using longer rails, greater charges...
Whatever they do, they will find more action than reaction, with sufficient current and mobility.
But why would they bother without a convincing presentation?
My presentation is convincing to anyone honest and intelligent.
******
The 2-s video and the graphs show violation of inertia, the key point.
******
Observers are welcome to point out where they cannot understand what I have presented.
That they have not, for the last 6 years (2017 videos were very detailed) means that I have got global acceptance, now mere politics hinders progress.
I would urge them to try out sliding the heavy armature, for greater efficiency and somehow
negating welding with far better contact surfaces. That is beyond my scope, for now.
The field is open to all those interested. I have been working on this from 2015, had a great time.
Eight years and you abandon the final step? What a waste of time!
What final step? All the information is there online. Anyone who wants, can at least go through my data if they do not want to repeat the experiment.
Certainly I have not wasted my time. It took me 25 years to get to where I want, that is, write to the Australian PM about this new discovery.
Now it is up to the proper authorities to take it up or ignore it for as long as they can.
[]
Cheers, see if you can get some worthy billionaire of pacific character interested to
make faster than light motors following this design - with myself at the helm that won't take long.
Prior to that, huge publicity in the global media is a must to revise physics following this discovery.
Burning all the toxic e=mcc=hv and entropy crap will make such a flame that will make that at Nalanda Uni look like a campfire.
All rights reserved by
Arindam Banerjee
Director
HTN Research Pty Ltd, Melbourne
Not going to happen without a decent presentation of proof. Poor quality information scattered in multiple places on the network is not a decent presentation.
It is a very decent presentation to all the world.
Also, absolutely novel in that it gives me copyright, is available to all totally free with no strings, cannot be corrupted, cannot be hijacked, cannot be suppresed....
Done cheaply! No wasting money on feeding parasites, just appeal to the vast endless public for all time. Depend upon democracy! Not learned professors and their pet journals.
It shows the power of truth, absolute truth!
What a triumph for truth!
And how???
It makes use of online media, freely available to all.
People can access it by the millions and billions, in due course.
And understand my point, that is, violation of inertia, and its extraordinary consequences.
The 2-s video shows it all.
Hurrah for Facebook, Youtube, Google Groups, Usenet, Instagram...
If you can't help yourself, neither can I.
No, you cannot say whether the data in the graphs follows from the experimental snaps of the 2-s video.
Too lazy to show whether or not I have got the correct data from the experiment, what.
Enjoy your other projects. This one seems dead.
You wish.
Quod videosi, videosi.
https://www.facebook.com/100000534193755/videos/pcb.7556513371043061/1006108110439305
Ed
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)