1. Forum
  2. Usenet
  3. UK.COMP.HOMEBUILT

  • Adapter for 3.5" drives in 5.25" bays

    From David@21:1/5 to All on Thu May 22 16:19:06 2025
    Having bought a used graphics card off eBay then discovered (as usual)
    that there were things I should have known but didn't I am now nearly
    ready to fit.

    A new more powerful PSU should drive it.

    I should have bought a half length card but didn't, so I need to remove a
    group of 3.5" drive bays from the case, and put the 2 x 3.5" drives plus
    the 2.5" SSD (in an adapter) into the spare 5.25" slots.

    There are plastic frames which can do the job, or metal brackets which
    screw to the side of the HDD case to make it wider.

    Any recommendations on which way to go, and reliable brands for the
    suggested solution?

    I am wondering if it might be better to mount the 2.5" drive directly into
    a 5.25" adapter instead of having an adapter within an adapter.

    As usual, any advice gratefully received.

    Cheers



    Dave R



    --
    W11 Home on Dell XPS 13 i7

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Marco Moock@21:1/5 to All on Wed Jun 4 20:39:46 2025
    On 22.05.2025 16:19 Uhr David wrote:

    There are plastic frames which can do the job, or metal brackets
    which screw to the side of the HDD case to make it wider.

    Any recommendations on which way to go, and reliable brands for the
    suggested solution?

    I am wondering if it might be better to mount the 2.5" drive directly
    into a 5.25" adapter instead of having an adapter within an adapter.

    As usual, any advice gratefully received.

    All of those ideas will work, I see no preference here.

    --
    kind regards
    Marco

    Send spam to 1747923546muell@stinkedores.dorfdsl.de

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)