I need to make several JG Speedfit connections to 1/2" BSP male.
This looks like what I need:-
https://www.toolstation.com/jg-speedfit-straight-tap-connector/p13693
... but will this go onto the sort of male connector where one would
normally use PTFE tape? I.e. it's not like a tap where one would
probably use a rubber washer of some sort to make the seal. The above
looks like it's expecting to have a washer inside it. Am I in the land
of taper BSP as opposed to parallel BSP?
Am I confused or is there a somewhat different type of fitting that I
need?
Snip <2Bo5I1X59USdLszMm1pN9113EMOTXoq6jXAipW1TLAid469qIIiahMWaswvJzEvDylx7pzqxk7sKo0hnZjBWnZgvxCHQcAVULFZV%2B%
Sorry - Here's the link! https://www.ebay.co.uk/itm/316255292464?_skw=brass+stem+adapter&itmmeta=01JRX1GZ56P8DP3ZM7QY0YXNJ6&hash=item49a248cc30:g:mqoAAOSwChxnqzKB&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1c6B4yWxFpP2DiXuVHzYYO%2Bw%
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 546 |
Nodes: | 16 (2 / 14) |
Uptime: | 11:58:27 |
Calls: | 10,389 |
Calls today: | 4 |
Files: | 14,061 |
Messages: | 6,416,871 |
Posted today: | 1 |